Emission cone and false echoes, Mounting and installation – VEGA VEGAPULS 43 Profibus PA User Manual

Page 14

Advertising
background image

14

VEGAPULS 43 – Profibus PA

15 m

0 m

4,0

2,3

4,0

2,3

0

25%

m

25˚

18˚

50%

Emission cone of a DN 50 flange antenna

Meas.
distance

Mounting and installation

VEGAPULS 43
DN 50

Emission cone and false echoes

The radar signals are focused by the an-
tenna system. The signals leave the antenna
in a conical path similar to the beam pattern
of a spotlight. This emission cone depends
on the antenna used. Any object in this beam
cone will reflect the radar signals. Within the
first few meters of the beam cone, tubes,
struts or other installations can interfere with
the measurement. At a distance of 6 m, the
false echo of a strut has an amplitude nine
times greater than at a distance of 18 m.

At greater distances, the energy of the radar
signal distributes itself over a larger area,
thus causing weaker echoes from obstruct-
ing surfaces. The interfering signals are
therefore less critical than those at close
range.

If possible, orient the sensor axis perpen-
dicularly to the product surface and keep
vessel installations (e.g. pipes and struts) out
of the emission cone.

The illustrations of the emission cones are
simplified and represent only the main beam
- a number of weaker beams also exist. Un-
der difficult measuring conditions, the an-
tenna location and alignment must be chosen
with the objective of reducing false echoes.
Only giving attention to the size of the useful
echo is not adequate when measuring condi-
tions are unfavourable.

In a difficult measuring environment, search-
ing for a mounting location with the lowest
possible false echo intensity will bring the
best results. In most cases, the useful echo
will then be present with sufficient strength.
With the adjustment software VVO on the PC,
you can have a look at the echo image and
optimise the mounting location.

If possible, provide a "clear view“ to the
product inside the emission cone and avoid
vessel installations in the first third of the
emission cone.

Emission cone of a DN 80 flange antenna

Meas. distance

20˚

10˚

20 m

0 m

3,0

1,7

3,0

1,7

0

m

50%

25%

VEGAPULS 43
DN 80

Advertising