VEGA VEGABAR 54 Ball valve fitting PASVE - Manual (Page 12)

4.4 H andling
The swivelling and locking lever is moved with the handle and
locked with the catch.
C Z
Z
M
M
C
4
3
2
1
Fig. 6: Handling of the ball valve fitting PASVE
1
Handle
2 Ring
3 Protective cover
4 Safety catch
4.5 M ount pressure transmitter
Proceed as follows:
1 Remove cover
2 Attach the handle and unlock the catch by 3½ turns to the
left
3 Bring ball valve with handle into position "Service", catch
snaps in
4 Screw the pressure transmitter in until it stops, max. torque
50 Nm
5 Loosen catch by pulling the ring
6 Hold the ring and, using the handle, bring the ball valve into
position "Operation"
7 Turn handle 3½ turns to the right so that the catch is locked
again
8 Attach the cover
The installation of the pressure transmitter is hence finished.
12 Ball valve fitting PASVE • for VEGABAR 54
Mounting
30177
-EN
-080307