VEGA VEGABAR 54 Ball valve fitting PASVE - Manual (Page 4)

2 F or your safety
2.1 A uthorised personnel
All operations described in this operating instructions manual
must be carried out only by trained specialist personnel
authorised by the plant operator.
During work on and with the device the required personal
protection equipment must always be worn.
2.2 A ppropriate use
The ball valve fitting PASVE™ is used for mounting of
VEGABAR 54 pressure transmitters with process fitting
"T
hread 1" suitable for PASVE". 1)
You can find detailed information on the application range in
chapter "Product description".
Operational reliability is ensured only if the instrument is
properly used according to the specifications in the operating
instructions manual as well as possible supplementary
instructions.
Due to safety and warranty reasons, any invasive work on the
device beyond that described in the operating instructions
manual may be carried out only by personnel authorised by the
manufacturer. Arbitrary conversions or modifications are
explicitly forbidden.
2.3 W arning about misuse
Inappropriate or incorrect use of the instrument can give rise to
application-specific hazards, e.g. vessel overfill or damage to
system components through incorrect mounting or adjustment.
2.4 G eneral safety instructions
This is a high-tech instrument requiring the strict observance of
standard regulations and guidelines. The user must take note
of the safety instructions in this operating instructions manual,
the country-specific installation standards as well as all
prevailing safety regulations and accident prevention rules.
1) PASVE is a trade name of Satron Instruments Oy.
4 Ball valve fitting PASVE • for VEGABAR 54
For your safety
30177
-EN
-080307