VEGA VEGASON 63 Foundation Fieldbus - Manual (Page 30)

30
6 Set up with the display and adjustment module PLICSCOM
VEGASON 63 • Foundation Fieldbus
28792-EN-130417
•
PIN
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the follow-
ing menu items to the reset values (see chart): 2)
Function Reset value
Max. adjustment 0 m(d)
Min. adjustment Meas. range end in m(d) 3)
Medium Liquid
Vessel form not known
Damping 0 s
Linearization Linear
Sensor-TAG Sensor
Displayed value AI-Out
Unit of measurement m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function Reset value
Language No reset
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values. 4)
Peak value
The min. and max. distance and temperature values are reset to the
actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
6.5 Menu schematic
Information:
Depending on the version and application, the highlighted menu
windows may not always be available.
Reset
Optional settings
2) Sensor-specific basic adjustment.
3) Depending on the sensor type, see chapter "Technical data".
4) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.