VEGA VEGAVIB 66 - two-wire - Manual (Page 13)

d
d 6
1
2
3
Fig. 4: Filling in the center, emptying laterally
1 VEGAVIB 66
2 Emptying opening
3 Filling opening
The vibrating element should protrude into the vessel to avoid
buildup. For that reason, avoid using mounting bosses for
flanges and screwed fittings. This is mainly applicable for
adhesive products.
If VEGAVIB 66 is mounted in the filling stream, unwanted
switching signals may be generated. Mount VEGAVIB 66 at a
location in the vessel where no disturbing influence from e.g.
filling openings, agitators etc. can occur.
Socket
Inflowing material
VEGAVIB 66 - with two-wire output 13
Mounting
29292
-EN
-060508