VEGA VEGASON 61 4 … 20 mA_HART - two-wire - Manual (Page 31)

31
6 Set up with the display and adjustment module PLICSCOM
VEGASON 61 • 4 … 20 mA/HART - two-wire
28775-EN-130417
Function Reset value
Vessel form not known
Damping 0 s
Linearization Linear
Sensor-TAG Sensor
Displayed value Distance
Current output - characteristics 4 … 20 mA
Current output - max. current 20 mA
Current output - min. current 4 mA
Current output - failure < 3.6 mA
Unit of measurement m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function Reset value
Backlight No reset
Language No reset
HART mode No reset
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values. 3)
Peak value
The min. and max. distance and temperature values are reset to the
actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
6.5 Menu plan ultrasonic sensor
Information:
Depending on the version and application, the highlighted menu
windows may not always be available.
Optional settings
3) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.