VEGA VEGACAP 65 - contactless electronic switch - Manual (Page 30)

30
9 Supplement
VEGACAP 65 • - contactless electronic switch
30017-EN-130916
Sensor length (L) 0.4 … 32 m (1.312 … 105 ft)
Max. tensile load (cable)
Ʋ PTFE partly insulated: ø 6 mm
(0.236 in)
10 KN (2248 lbs)
Ʋ PTFE partly insulated: ø 8 mm
(0.315 in)
10 KN (2248 lbs)
Ʋ PA partly insulated: ø 11 mm (0.433 in) 10 KN (2248 lbs)
Max. torque (process fitting - thread) 100 Nm (74 lbf ft)
Measuring frequency 430 kHz
Output variable
Output
Contactless electronic switch
Modes (switchable) Min./Max.
Switching delay
Ʋ When immersed 0.7 s
Ʋ When laid bare 0.7 s
Ʋ In case of failure 1 s
Ambient conditions
Ambient temperature on the housing
-40 … +80 °C (-40 … +176 °F)
Storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
Process pressure
Ʋ Standard -1 … +64 bar/-100 … 6400 kPa (-14.5 … 928 psig)
Ʋ with screening tube adapter (PN1) 0 … +1 bar/0 … 100 kPa (0 … 14.5 psig)
Process temperature VEGACAP 65 of 316L
Ʋ Insulation PA -50 … +80 °C (-58 … +176 °F)
Ʋ Without insulation -50 … +150 °C (-58 … +302 °F)
Process temperature (thread or flange
temperature) with temperature adapter
(option)
-50 … +200 °C (-58 … +392 °F)