VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Manual (Page 15)

1
2
> 500 mm
Fig. 5: Mounting on round vessel tops
1 Reference plane
2 Vessel center or symmetry axis
In vessels with conical bottom it can be advantageous to mount the
sensor in the center of the vessel, as measurement is then possible
down to the lowest point of the vessel bottom.
Fig. 6: Vessel with conical bottom
Do not mount the instruments in or above the filling stream. Make sure
that you detect the product surface, not the inflowing product. Inflowing medium
VEGAPULS 66 • Foundation Fieldbus 15
4 Mounting
28453
-EN
-090305