VEGA VEGASWING 63 Lock fitting ARV-SG63.2 - pressure range: -1…16 bar - Manual (Page 12)

6 D ismounting
6 .1 Dismounting steps
Note chapter "Mounting" and carry out the described steps in
reverse order.
Warning:
If you want to remove the lock fitting for service or control
purposes, make sure that the vessel is unpressurised.
If you proceed as follows, it is not necessary to readjust the
switching point and the lock fittings must not be dismounted
completely.
1 Switch off power supply of the sensor
2 Remove all connection cables
3 Loosen the mounting boss with a screwdriver
4 Remove the sensor together with the lock fitting
6 .2 Disposal
ARV-SG63.2 consists of materials which can be recycled by
specialised recycling companies. Mark the instrument as
scrap and dispose it according to the national, legal
regulations.
Materials: see chapter "Technical data"
If you have no possibility to dispose of the old instrument
professionally, please contact us concerning return and
disposal.
12 Lock fitting ARV-SG63.2 • - pressure range: -1 … 16 bar
6 Dismounting
29751
-EN
-081013