VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) standpipe ver. Foundation Fieldbus - Manual (Page 42)

Information:
When loading on site, first of all the order data must be downloaded
from the Internet (see operating instructions manual "Oscillator").
The electronics modules are adapted to the respective sensor and
distinguish also in the signal output or power supply.
Oscillator PS-E.60KF suitable for K band VEGAPULS 61, 62, 63 -
Foundation Fieldbus. The following versions are available which differ
in the approvals:
l PS-E.60KFX (X = without approvals)
l PS-E.60KFA (A = approvals CA, DA, EA according to product list)
l PS-E.60KFD (D = approvals KX, KF according to product list)
l PS-E.60KFE (E = approvals CX, DX, CK, DI, EX, GI, UX, UF
according to product list)
8.4 Software update
The following components are required to update the sensor software:
l Sensor
l Power supply
l VEGACONNECT
l PC with PACTware
l Current sensor software as file
At "www.vega.com/downloads" go to "Software". Select under "plics
instruments and sensors" the suitable instrument series. Load the zip
file via the right mouse key with "Save target as" e.g. on the desktop of
your PC. Extract all files available in the zip file, e.g. to the desktop.
Connect the sensor to power supply and provide connection from PC
to the instrument via VEGACONNECT. Start PACTware and provide
connection to the sensor, e.g. via the VEGA project assistant. Close
the parameter window of the sensor, as far as open.
Go in the PACTware menu bar to "Instrument data", "Additional
functions" and "Update instrument software".
PACTware checks now the actual hardware and software version of
the sensor and displays the data. This procedure lasts approx. 60 s.
Push the button " Update software" and select the previously
extracted hex file. Then the software update can be started. Further
files are installed automatically. Depending on the sensor, this
procedure lasts approximately 1 h.
8.5 Instrument repair
If a repair is necessary, please proceed as follows:
Assignment
Foundation Fieldbus
Load sensor software to
PC
Prepare update
Load software into sen-
sor
42 VEGAPULS 62 standpipe version • Foundation Fieldbus
8 Maintenance and fault rectification
28740
-EN
-090305