VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) standpipe ver. 4 … 20 mA_HART two-wire - Manual (Page 33)

Menu item Reset value
C urrent output - failure < 3.6 mA
U nit of measurement m(d)
T he values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Menu item Reset value
L ighting no reset
L anguage no reset
SIL no reset
HART mode no reset
Factory setting
L
ike basic adjustment, furthermore special parameters are reset to
default values. 2)
Pointer
T
he min. and max. distance values are reset to the actual value.
A
dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2) S pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAPULS 66 standpipe version • 4 … 20 mA/HART two-wire 33
6 S et up with the indicating and adjustment module PLICSCOM
28741
-EN
-090305