VEGA VEGASWING 63 - NAMUR - Manual (Page 31)

31
9 Supplement
VEGASWING 63 • - NAMUR
29231-EN-130409
Density 0.7 … 2.5 g/cm³ (0.025 … 0.09 lbs/in³); 0.5 … 2.5 g/cm³
(0.018 … 0.09 lbs/in³) by switching over
Electromechanical data - version IP 66/IP 67 and IP 66/IP 68; 0.2 bar
Cable entry/plug
1)
Ʋ Single chamber housing – 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
blind plug M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
– 1␣x plug (depending on the version), 1␣x blind stopper
M20␣x␣1.5
Screw terminals for wire cross-section up to 1.5 mm² (AWG 16)
Electromechanical data - version IP 66/IP 68 (1 bar)
Cable entry
Ʋ Single chamber housing – 1 x IP 68 cable gland M20 x 1.5; 1 x blind plug
M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
Connection cable
Ʋ Wire cross-section 0.5 mm² (AWG 20)
Ʋ Wire resistance < 0.036 Ω/m (0.011 Ω/ft)
Ʋ Tensile strength < 1200 N (270 lbf)
Ʋ Standard length 5 m (16.4 ft)
Ʋ Max. length 1000 m (3280 ft)
Ʋ Min. bending radius 25 mm (0.984 in) with 25 °C (77 °F)
Ʋ Diameter approx. 8 mm (0.315 in)
Ʋ Colour - standard PE Black
Ʋ Colour - standard PUR Blue
Ʋ Colour - Ex-version Blue
Adjustment elements
Mode switch
Ʋ Min. rising characteristic curve (High current when immersed)
Ʋ Max. falling characteristics (Low current when immersed)
Sensitivity switch
Ʋ 0.5 0.5 … 2.5 g/cm³ (0.018 … 0.9 oz/in³)
Ʋ 0.7 0.7 … 2.5 g/cm³ (0.025 … 0.9 oz/in³)
Test key simulation of a line break between sensor and process-
ing unit
1) Depending on the version M12 x 1, according to ISO 4400, Harting, 7/8" FF.