VEGA VEGASWING 61 - two-wire User Manual

Page 9

Advertising
background image

9

3 Product description

VEGASWING 61 • - two-wire

29227-EN-130409

3.4 Storage and transport

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

according to DIN EN 24180.
The packaging of standard instruments consists of environment-

friendly, recyclable cardboard. The sensor is also equipped with a

protective cap of ABS. For special versions, PE foam or PE foil is also

used. Dispose of the packaging material via specialised recycling

companies.

Transport must be carried out under consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.
Unless otherwise indicated, the packages must be stored only under

the following conditions:

Not in the open

Dry and dust free

Not exposed to corrosive media

Protected against solar radiation

Avoiding mechanical shock and vibration

Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

Relative humidity 20 … 85 %

Packaging

Transport

Transport inspection

Storage

Storage and transport

temperature

Advertising