5 menu schematic – VEGA VEGASON 61 Profibus PA User Manual
Page 31
31
6 Set up with the display and adjustment module PLICSCOM
VEGASON 61 • Profibus PA
28784-EN-130417
Menu section
Function
Reset value
Service
Additional PA value
Secondary Value 1 %
Out-Scale-Unit
%
PV-Out-Scale
0.00 lin % = 0.0 %
100.0 lin % = 100 %
Unit of measurement
m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Menu section
Function
Reset value
Basic settings
Sensor address
No reset
Service
Language
No reset
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
4)
Peak value
The min. and max. distance and temperature values are reset to the
actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
6.5 Menu schematic
Information:
Depending on the version and application, the highlighted menu
windows may not always be available.
Optional settings
4)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.