VEGA VEGAPULS 68 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Manual (Page 54)

10 Supplement
10.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
-
Process fitting 316L, Hastelloy C22, Hastelloy C22 plated
-
Antenna 316L, 316L electropolished, 316L Safecoat coated,
Hastelloy C22, stainless steel precision casting
1.4848
-
Seal process fitting - threaded version Klingersil C-4400
-
Antenna cone PTFE (TFM 1600 PTFE)
-
seal, antenna system FKM (Viton), FFKM (Kalrez 2035, 6230 (FDA),
6375)
Materials, non-wetted parts
-
Housing Plastic PBT (polyester), Alu die-casting powder-
coated, stainless steel 316L
-
Seal between housing and housing
cover NBR (stainless steel housing), silicone (Alu/plastic
housing)
-
Inspection window in housing cover for
PLICSCOM Polycarbonate (UL-746-C listed)
-
Ground terminal 316Ti/316L
Weight with horn antenna
-
Process fitting - thread, depending on
thread size and housing 2 … 2.8 kg (4.409 … 6.173 lbs)
-
Process fitting - flange, depending on
flange size and housing 4.2 … 15.4 kg (9.259 … 33.95 lbs)
-
Process fitting swivelling holder with
flange, depending on flange size and
housing 5.2 … 16.4 kg (11.46 … 35.16 lbs)
Weight with parabolic antenna
-
Process fitting - thread, depending on
thread size and housing 2.8 … 3.6 kg (6.173 … 7.496 lbs)
-
Process fitting - flange, depending on
flange size and housing 5 … 16.2 kg (11.02 … 35.71 lbs)
-
Process fitting swivelling holder with
flange, depending on flange size and
housing 6 … 17.2 kg (13.23 … 37.92 lbs)
54 VEGAPULS 68 • Foundation Fieldbus
10 Supplement
29264
-EN
-090305