VEGA VEGAKON 66 with transistor output - Manual (Page 21)

As soon as you insert the electronics module, VEGAKON 66 is
ready for operation.
7 .3 Simulation of switching functions
With the rotary switch for conductivity adjustment, full covering
or empty signal can be simulated.
The filling height must not be changed. You can hence easily
check the response of connected signalling and switching
facilities. Parts of the sensor electronics are also checked
during this test.
The following switch positions, simulate the switching con-
ditions:
l
Switch position "Test max." full covering (max.)
l
Switch position "Test min." empty signal (min.)
7 .4 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from the Internet on
our homepage www.vega.com under: "Downloads - Forms
and certificates - Repair form".
By doing this you help us carry out the repair quickly and
without having to call back for needed information.
l
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and, if need be, also a safety
data sheet outside on the packaging
l
Please ask the agency serving you for the address of your
return shipment. You can find the respective agency on our
website www.vega.com under: "C
ompany - VEGA world-
wide"
VEGAKON 66 - with transistor output 21
Maintenance and fault rectification
32650
-
EN
-070615