VEGA VEGASWING S 52 - Manual (Page 17)

5 .3
Functional chart
The following chart provides an overview of the
switching conditions depending on the adjusted
mode and level.
Level Switching
status Control
lamp
Mode max.
transistor con-
ducts
or
Switch closed
Green
Mode max.
transistor
blocks
or
Switch open
Red
Mode min.
transistor con-
ducts
or
Switch closed
Green
Mode min.
transistor
blocks
or
Switch open
Red
Failure any
transistor
blocks
or
Switch open
fl ashes red
6 M aintain
6 .1
Maintenance
When used in the correct way, no special main-
tenance is required in normal operation.
6 .2 24 hour service hotline
However, should these measures not be success-
ful, call the VEGA service hotline in urgent cases
under the phone no. +49 1805 858550.
The hotline is available to you 7 days a week
round-the-clock. Since we offer this service world-
wide, the support is only available in the English
language. The service is free of charge, only the
standard telephone costs will be charged.
6 .3
Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our
Internet homepage www.vega.com under: "Down-
loads - Forms and certificates - Repair form".
By doing this you help us carry out the repair
quickly and without having to call back for needed
information.
l
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and, if need be, also
a safety data sheet outside on the packaging
l
Please ask the agency serving you for the
address of your return shipment. You can find
the respective agency on our website www.
vega.com under: "Company - VEGA world-
wide"
7 D ismounting
7 .1 Dismounting steps
Warning:
Before dismounting, be aware of dangerous
process conditions such as e.g. pressure in
the vessel, high temperatures, corrosive or
toxic products etc.
VEGASWING S 52 17
Maintain
32948
-
01
-
080917