VEGA VEGAFLEX 67 (-40…+150°C PFA insulated) Profibus PA - Manual (Page 47)

considerably on the application. Hard and fast
accuracy specifications are thus not available.
Deviation see diagrams
The accuracy values of the diagrams refer to the
interface.
Depending on the installation conditions, there can
be deviations which can be rectified with an
adaptation of the adjustment or a change of the
measured value offset in the DTM service mode.
L
0
15 mm
(0.591 " )
-15 mm
(-0.591 " )
-10 mm
(-0.394 ")
-10 mm
(-0.394 ")
0,35 m
(13.78 ")
0,2 m
(7.874 " )
0,1 m
(3.937 ")
1 1
Fig. 20: Deviation VEGAFLEX 67 in rod version
1 Dead zone - no measurement possible in this area
L Probe length
VEGAFLEX 67 • Profibus PA 47
10 Supplement
32305
-
EN
-120329