VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Profibus PA User Manual
Page 52
50°C
(122°F)
70°C
(158°F)
150°C
(302°F)
200°C
(392°F)
T
Proz
T
u
Fig. 33: Temperature derating VEGAPULS 66 enamel with indicating and adjustment module
Process conditions
For the process temperature and the vessel pressure, you also have to note the specifications on
the type label! Always the lowest value is applicable!
Process temperature (measured on the
process fitting)
-40 … +200 °C (-40 … +392 °F)
Vessel pressure relating to the antenna
system
-100 … 1600 kPa/-1 … 16 bar (-14.5 … 232 psig)
Vessel pressure relating to the flange nom-
inal stage
see supplementary instructions manual "Flanges
according to DIN-EN-ASME-JIS"
Vibration resistance
mechanical vibrations with 4 g and 5 … 100 Hz
9)
9)
Tested according to the regulations of German Lloyd, GL directive 2.
52
VEGAPULS
66 enamel • Profibus PA
10 Supplement
33335
-EN
-090305