5 connect the sensor, 1 preparing the connection, 2 connection procedure – VEGA Float for oil_water detection for for VEGACAP 63 User Manual
Page 8: 5connect the sensor
Advertising
5
Connect the sensor
5
.1 Preparing the connection
Follow the instructions in the operating instructions manual of the
sensor.
The connection cable can influence the floating position of the
measuring system. For this reason, use a light, flexible connection
cable and fasten the cable on a cable holder.
5
.2 Connection procedure
The electrical connection is described in the operating instructions of
the sensor.
8
Float for oil/water detection • for VEGACAP 63
5 Connect the sensor
31595
-EN
-100604
Advertising