6 set up, 1 indicating and adjustment elements, Lights permanently during a hardware error – VEGA VEGALOG 571 AR User Manual
Page 13: Led operating voltage [3
6 Set up
6.1 Indicating and adjustment elements
1
2
3
4
5
6
7
8
9
10
2
3
on
VEGALOG
VEGALOG
571
!
1
Fig. 4: Indicating and adjustment elements
1
LEDs for switching condition of the outputs
2
LED for fault signal
3
LED for operating voltage
l
LED status indication of the outputs [1]
-
lights yellow when the output is switched (configuration
as switching output)
-
lights red in case of fault signal (configuration as failure
output)
l
LED fault signal [2]
-
flashes in case of communication problems on the
LOGBUS
-
lights during initialisation and during the self-test
-
lights permanently during a hardware error
l
LED operating voltage [3]
-
lights when voltage supply is on
The module cards of the VEGALOG system have no own
adjustment elements. All adjustment measures are carried out
with the PC through the adjustment software PACTware™.
Description of the status
LEDs
VEGALOG 571 AR - Output card relay
13
Set up
31950
-EN
-060606