VEGA VEGALOG 571 AR - Manual (Page 6)

3 Product description
3.1 Configuration
The scope of delivery encompasses:
l
19" module card VEGALOG 571 AR
l
Documentation
- this operating instructions manual
3.2 Principle of operation
The AR card (Ausgang Relais, i.e. output relay) provides
together with the VEGALOG 571 processing system ten relay
outputs with floating spdts.
They can be used for transmission of the measuring results to
the following instruments:
l
Acoustic or optical signalling systems
l
Magnet valves
l
Contactors for control of large consumers such as pumps
The VEGALOG 571 AR card makes the processing results
available on up to ten outputs. It is suitable for outputting level,
single or sum fault messages. The switching condition of each
output is displayed via a two-coloured LED in the front plate.
Depending on the parameter adjustment, this LED lights
yellow as switching output, or if so configured, red as fault
output.
The module card is powered via the common power supply
unit of the VEGALOG system.
You can find detailed information on the power supply in the
"Technical data" in the "Supplement".
3.3 Operation
The operation of VEGALOG 571 is carried out via a PC which
can be connected via the RS232 interface of the CPU. As an
alternative, connection via Ethernet and VEGACOM 558 is
possible.
The adjustment software PACTware™ with the corresponding
DTMs is installed under Windows™ and ensures easy
configuration of measuring systems as well as parameter
adjustment of connected VEGA sensors. For this purpose,
PACTware™ provides a clear adjustment interface with menu
Scope of delivery
Area of application
Physical principle
Power supply
6 VEGALOG 571 AR - Output card relay
Product description
31950
-EN
-060606