3 mounting, 1 mounting preparations, 2 mounting steps – VEGA Connection cable IP 66_IP 68 (1 bar) User Manual
Page 5: 3mounting
Advertising
3
Mounting
3
.1 Mounting preparations
The following tools are required for mounting:
l
Spanner SW 24 for unscrewing the cable gland
l
Spanner SW 9 for unscrewing the filter element
l
Screwdriver size 4 for screwing in the blind stopper
The blind stopper consists of adapter, O-ring and closing screw. It is
assembled according to the following drawing:
1
2
3
Fig. 1: Assembly of blind stopper
1
Adapter
2
O-ring
3
Closing screw
3
.2 Mounting steps
The illustration below shows the position of the cable gland and the
filter element in the respective housing:
Tools
Blind stopper
Connection cable IP 66/IP 68 (1 bar) • Retrofit set/Accessory for plics sensors
5
3 Mounting
34107
-
EN
-120524
Advertising