VEGA VEGAWAVE S 61 - Manual (Page 19)

8 S upplement
8 .1
Technical data
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
-
Tuning fork 316 L
-
Process fitting 316 L
-
Extension tube 316 L
-
Process seal Klingersil C-4400
Materials, non-wetted parts
-
Housing plastic PBT (Polyester)
-
Housing cover Plastic PA 12 (polyamide, clear)
-
Seal ring (housing/hous-
ing cover) Silicone
-
Ground terminal 316 L
Sensor length (L) 165, 500, 1000 or 1500 mm (6.496, 19.69, 39.37, 59.06 in)
Weight approx. 1500 g
Max. lateral load 600 N along the fork side
Output variable
Relay output 2 fl oating spdts (DPDT)
-
Turn-on voltage min. 10 mV / max. 253 V AC/DC
-
Switching current min. 10 µA / max. 3 A AC, 1 A DC
-
Breaking capacity min. 50 mW / max. 750 VA, 54 W
-
Contact material AgNi or AgSnO and Au plated
-
Instruction If inductive loads or stronger currents are switched through, the gold
plating on the relay contact surface will be permanently damaged. The
contact is then no longer suitable for switching low-level signal circuits.
Transistor output Floating transistor output
-
Turn-on voltage max. 55 V DC
-
Switching current max. 400 mA
-
Blocking current < 100 µA
Modes (adjustable) min./max.
Switching delay ON: approx. 0.5 sex. / OFF: approx. 1 sec.
Ambient conditions
Ambient temperature -40 … +80 °C
Storage and transport tem-
perature -40 … +80 °C
VEGAWAVE S 61 19
Supplement
32949
-
01
-
080108