VEGA VEGABAR 63 Profibus PA - Manual (Page 17)

11 Tighten the compression nut of the cable entry. The seal ring must
completely encircle the cable
12 Screw the housing cover on
The electrical connection is finished.
Fig. 6: Connection steps 6 and 7
Proceed as follows:
1 Loosen the four screws on the housing socket with an Allen key
size 4
IP 68 version with exter-
nal housing
VEGABAR 63 • Profibus PA 17
5 Connecting to power supply
32463
-
EN
-081209