VEGA VEGAWELL 52 4 … 20 mA - Manual (Page 13)

4 .3 Mounting steps with screwed connection
1
2
3
4
5
6
Fig. 5: Threaded fitting
1 Suspension cable
2 Seal screw
3 Cone bushing
4 Seal cone
5 Threaded fitting
6 Seal
M ount VEGAWELL 52 with screwed connection as follows:
1 W
eld the welded socket into the vessel top
2 L ower VEGAWELL 52 to the requested height by means on the
welded socket G1½ A or 1½ NPT on the vessel side
3 I nsert the suspension cable from below into the open screwed
connection
4 S lide the seal cone and the cone sleeve over the suspension
cable, fasten manually with the seal screw
5 S crew the screwed connection into the socket, fasten with SW 30
and then fasten seal screw with SW 19
H ow to correct the height:
1 L oosen seal screw with SW 19
2 S lide seal cone and cone sleeve to the requested position on the
cable
3 F asten the seal screw
R emoval is carried out in reverse order.
VEGAWELL 52 • 4 … 20 mA 13
4 M ounting
35401
-
EN
-111021