VEGA VEGAWELL 52 4 … 20 mA - Manual (Page 24)

6 C ut the suspension cable with an edge cutter to the requested
length
7 R emove approx. 10 cm of the cable mantle, strip off approx. 1 cm
of the wire ends, insert the filter adapter
8 S hift the seal screw, cone sleeve and seal cone to the suspension
cable and insert the cable into the screwed socket, insert the wire
ends through the cable entry into the mounting plate
T he work steps are finished.
6 .5 Instrument repair
I f a repair is necessary, please proceed as follows:
Y
ou can download a return form (23 KB) from our Internet homepage
www.vega.com under: "Downloads - Forms and certificates - Repair
form".
B
y doing this you help us carry out the repair quickly and without
having to call back for needed information.
l P rint and fill out one form per instrument
l C
lean the instrument and pack it damage-proof
l A ttach the completed form and, if need be, also a safety data
sheet outside on the packaging
l P lease ask the agency serving you for the address of your return
shipment. You can find the respective agency on our website
www.vega.com under: "Company - VEGA worldwide"
24 VEGAWELL 52 • 4 … 20 mA
6 M aintenance and fault rectification
35401
-EN
-111021