VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) HART - integrated accumulator User Manual
Page 29
Advertising
29
5 Connecting to power supply
VEGAPULS 61 • HART - integrated accumulator
40792-EN-121011
1
Fig. 27: Switch on/off button outside on the housing
1 On/Off button
After switching on, the instrument carries out a self-check for approxi-
mately 30 s:
•
Internal check of the electronics
•
Indication of the instrument type, hardware and software version,
measurement loop name on the display or PC
•
Indication of the status message "F 105 Determine measured
value" on the display or PC
As soon as a plausible measured value is found, this value will be
displayed. The value corresponds to the actual level as well as the
settings already carried out, e.g. factory setting.
Advertising