VEGA VEGAMIP R61 Receiving unit - Relay - Manual (Page 18)

2
1
Fig. 9: Front flush installation
1 Unfavourable installation - bulk solid can settle in front of the sensor
2 Correct front flush installation
If a front-flush installation is not possible, you can fill long sockets with
a plastic or ceramic cylinder to avoid build up of bulk solids and dust
deposits. Select the material according to the diameter of the socket
and adapt the length as far as possible to the shape of the vessel wall.
Secure the filling material against falling out or turning. If using a fixing
screw is technically not possible, you can secure the material in the
socket with an adhesive.
18 VEGAMIP R 61 • - Relay
4 Mounting
35786
-EN
-120228