VEGA VEGABAR 54 4 … 20 mA_HART - Manual (Page 54)

54
10 Supplement
VEGABAR 54 • 4 … 20 mA/HART
36726-EN-130321
Ʋ PMC 316L PN 10
Ʋ Flange 316L PN 40
Product temperature depending on the measuring cell seal 12)
Measuring cell seal Product temperature
FKM (VP2/A) -20 … +120 °C (-4 … +248 °F)
EPDM (A+P 75.5/KW75F) -40 … +120 °C (-40 … +248 °F)
FFKM (Kalrez 6375) -20 … +120 °C (-4 … +248 °F)
FFKM (Perlast G75S) -15 … +120 °C (-4 … +248 °F)
FFKM (Perlast G75B) -15 … +120 °C (-4 … +248 °F)
Vibration resistance mechanical vibrations with 4 g and 5 … 100 Hz tested
according to the regulations of German Lloyd, GL char-
acteristics 2.
Shock resistance Acceleration 100 g/6 ms 13)
Electromechanical data - version IP 66/IP 67
Cable entry/plug
14)
Ʋ Single chamber housing – 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
blind plug M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
– 1␣x plug (depending on the version), 1␣x blind stopper
M20␣x␣1.5
or:
– 2 x blind plug M20 x 1,5
Ʋ Double chamber housing – 1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
blind plug M20 x 1.5; plug M12 x 1 for the external
display and adjustment unit (optional)
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT, plug
M12 x 1 for the external display and adjustment unit
(optional)
or:
– 1 x plug (depending on the version), 1 x blind plug
M20 x 1.5; plug M12 x 1 for the external display and
adjustment unit (optional)
or:
– 2 x blind stoppers M20 x 1.5; plug M12 x 1 for the
external display and adjustment unit (optional)
Spring-loaded terminals for wire cross-
section
< 2.5 mm² (AWG 14)
12) With process fitting PVDF, max. 100 °C (212 °F).
13) Tested according to EN 60068-2-27.
14) Depending on the version M12 x 1, according to ISO 4400, Harting, 7/8" FF.