VEGA WEB-VV LH - Manual (Page 10)

Fig. 3: WEB-VV adjustment interface
1 Dynamic navigation section
2 Static navigation section
3 Breadcrumb navigation
4 Identification section
5 Information and application section
l Dynamic navigation section: Shows the respective menu items
in dependence on the respective level
l Static navigation section: Offers the options of global settings
such as language, time and password
l Breadcrumb navigation: Shows the path of the current page,
provides the option to jump back to higher levels
l Identification section: Informs you on the current application
level and shows the name of the plant operator, project and
measured value view.
l Information and application section: Shows the measured
values or allows user-specific settings and selection options
The following steps are the minimum requirement for a measured
value indication:
1 Create a plant operator: The plant operator is the first in the
hierarchy. To visualise measured values, at least one plant
operator must be set up.
2 Create a project: A project includes the assignment of a device
network, the user administration as well as the actual visualisation.
3 Assign a device network: Each device network stands for a
signal conditioning instrument with one or several measurement
loops as well as a data transmission facility.
4 Create a measured value view: The measured value view
defines which measurement loops of a signal conditioning
instrument are combined into a group and made available for
visualisation.
First steps
10 WEB-VV LH • Configuration, first steps
5 Operation
35538
-EN
-090630