Yamaha PSR-530 - Manual (Page 50)

,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQ
48
Registration Memory
3
Register the Settings
While holding the [MEMORY] button, press one of the REGISTRATION
MEMORY buttons — [1] through [4]. Any data that was previously in the selected
location is erased and replaced by the new settings. The corresponding REGISTRA-
TION MEMORY number will appear below “REGISTRATION” in the display.
Recall the Registered Panel Settings
Simply select the appropriate bank as described above, then press the desired
REGISTRATION MEMORY button at any time to recall the memorized settings. The
corresponding Registration Memory number will appear below “REGISTRATION”
in the display, and the appropriate setting changes will appear in the display.
• REGISTRATION
MEMORY data can-
not be recalled when
the ONE TOUCH
SETTING feature is
on.
• No REGISTRATION
MEMORY indicator
will be showing when
the PSR-530 is ini-
tially turned on or
when a bank is se-
lected prior to actually
selecting a REGIS-
TRATION MEMORY
number.
The Accompaniment Freeze Function
When the FREEZE function is engaged, the accompaniment parameters listed
above will not be changed when a REGISTRATION MEMORY is recalled. This
allows you to recall different REGISTRATION MEMORY settings while using Auto
Accompaniment, without suddenly disturbing the flow of the accompaniment. The
FREEZE function is turned on and off by pressing the [FREEZE] button. The
“FREEZE” icon appears in the display when it is turned on.
• FREEZE remains on
even if a different reg-
istration bank is se-
lected.
• The Freeze function
will automatically be
turned on when one
of the following
modes, Song, Record
or Style Revoice, is
engaged.
REGISTRATION MEMORY
4 3 2 1
REGISTRATION
1 2 3 4
MULTI PAD
REPEAT
1
MEASURE
REGISTRATION MEMORY
4 3 2 1
REGISTRATION
1 2 3 4
MULTI PAD
REPEAT
1
MEASURE
GISTRATION MEMORY
4 3
FREEZE
REGISTRATION
1 2 3 4
MULTI PAD
FREEZE
REPEAT
1
MEASURE
• The REGISTRATION
MEMORY contents
will be retained even
after turning the
power off. See page
98 for the details.