VEGA VEGABAR 51 4 … 20 mA - Manual (Page 6)

6
2 For your safety
VEGABAR 51 • 4 … 20 mA
36712-EN-130321
2.6 CE conformity
This device fulfills the legal requirements of the applicable EC guide-
lines. By attaching the CE mark, VEGA provides a confirmation of
successful testing. You can find the CE conformity declaration in the
download area of "www.vega.com".
2.7 Measuring range - permissible process
pressure
Due to the application, a measuring cell with a measuring range
higher than the permissible pressure range of the process fitting may
have been integrated. The permissible process pressure is stated with
"Process pressure" on the type label, see chapter 3.1 "Configuration".
For safety reasons, this range must not be exceeded.
2.8 Fulfillment of NAMUR recommendations
The device fulfills the requirements of the applicable NAMUR recom-
mendations.
2.9 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and op-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.
2.10 Safety instructions for oxygen applications
For instruments in oxygen applications the special instructions in
chapters "Storage and transport", "Mounting" as well as "Technical
data" under "Process conditions"must be noted. Furthermore the valid
national regulations, implementation instructions and memorandums
of the professional assocations must be noted.
2.11 Environmental instructions
Protection of the environment is one of our most important duties.
That is why we have introduced an environment management system
with the goal of continuously improving company environmental pro-
tection. The environment management system is certified according
to DIN EN ISO 14001.
Please help us fulfill this obligation by observing the environmental
instructions in this manual:
•
Chapter "Packaging, transport and storage"
•
Chapter "Disposal"