Panasonic WV-SF336 - Manual (Page 17)

17
<Side view>
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Before initializing the settings, it is recommended to write down the settings in
advance.
FOCUS
ASSIST
Tilting lock screw
INITIAL SET button
SDHC/SD memory card slot
Focus assist (F.A.)
button
Access indicator (blinking at accessing)
Link indicator (lighting at linking)
SDHC/SD memory card error
indicator/F.A. indicator
(Lights when the focus assist function
is activated or when the focus ring is
positioned near the best focus position)
SF335 SF332
SF335 SF332
AF
Auto focus (AF)
button
SF336
SF336
SDHC/SD memory card error
indicator/AF indicator
(Blinks when AF is being
adjusted)
FRONT
TOP
EXT I/O
AUDIO
OUT
MIC/
LINE IN
10BASE-T/
100BASE-IX
4
2 3
1
MONITOR OUT
F
N
Audio output connector
Microphone/line input connector
Network connector
Lens
External I/O terminals
Zoom lock knob
Focus lock knob
SF335
SF336
F
N