Panasonic WV-SF336 - Manual (Page 36)

36
Configure the network settings
Install the software
Before installing the software, refer to the readme file on the provided CD-ROM first.
Software included on the provided CD-ROM
• Panasonic IP setting software
Configure the network settings of the camera. Refer to the following for further information.
• Viewer Software "Network Camera View 4"
It is necessary to install the viewer software "Network Camera View 4" to display images on a
PC. Install the viewer software by double-clicking the "nwcv4setup.exe" icon on the provided
CD-ROM.
Configure the network settings of the camera using the
Panasonic IP setting software
It is possible to perform the network settings of the camera using the IP setting software on the
provided CD-ROM.
When using multiple cameras, it is necessary to configure the network settings of each camera
independently.
If the Panasonic IP setting software does not work, configure the network settings of the camera
and the PC individually on the "Network" page of the setup menu. Refer to the Operating
Instructions (PDF) for further information.
Important:
• When using Microsoft Windows Vista, the "Windows Security Alert" window may be displayed
when starting the IP setup software. In this case, disable "User Account Control" from the con-
trol panel. In this case, disable "User Account Control" from the control panel.
• For the security enhancement, the MAC address/IP address of the camera to be configured will
not be displayed when around 20 minutes have passed after turning on the power of the cam-
era. (When the effective period is set to "20 minutes" in the IP setup)
• Panasonic IP setting software is inoperable in other subnets via the same router.
• This camera cannot be displayed or set with an older version of the IP setting software (version
2.xx).