VEGA VEGAFLEX 83 4 … 20 mA_HART - four-wire Polished version - Manual (Page 49)

49
7 Setup with PACTware
VEGAFLEX 83 • 4 … 20 mA/HART - four-wire
41840-EN-130314
7 Setup with PACTware
7.1 Connect the PC
3
1
2
Fig. 20: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 Sensor
Information:
The interface adapter VEGACONNECT 3 is not suitable for connec-
tion to the sensor.
1
5
2 4
3
OP EN
TWIST USB
LOCK
Fig. 21: Connecting the PC via HART to the signal cable
1 VEGAFLEX 83
2 HART resistance 250 Ω (optional depending on processing)
3 Connection cable with 2 mm pins and terminals
4 Processing system/PLC/Voltage supply
Necessary components:
•
VEGAFLEX 83
•
PC with PACTware and suitable VEGA DTM
•
VEGACONNECT 4
•
HART resistance approx. 250 Ω
•
Power supply unit or processing system
Via the interface adapter
directly on the sensor
Connection via HART