VEGA VEGABAR 83 4 … 20 mA - Operating Instructions - Manual (Page 40)

40
6 Set up with the display and adjustment module
VEGABAR 83 • 4 … 20 mA
45033-EN-131010
In menu item"Current output, size" you determine which measured
value the current output refers to.
In menu item "Current output, adjustment" you can assign a respec-
tive measured value to the current output.
In this menu item, you read out the instrument name and the instru-
ment serial number:
In this menu item, the hardware and software version of the sensor is
displayed.
In this menu item, the date of factory calibration of the sensor as well
as the date of the last change of sensor parameters are displayed via
the display and adjustment module or via the PC.
In this menu item, the features of the sensor such as approval, pro-
cess fitting, seal, measuring range, electronics, housing and others
are displayed.
Additional settings - Cur-
rent output 1 and 2 (size)
Additional settings -
Current output 1 and 2
(adjustment)
Info - Instrument name
Info - Instrument version
Info - Factory calibration
date
Info - Sensor character-
istics