VEGA VEGAPULS 66 (≥ 2.0.0 - ≥ 4.0.0) enamel Modbus and Levelmaster protocol - Manual (Page 24)

24
5 Connecting to power supply and bus system
VEGAPULS 66 enamel • Modbus and Levelmaster protocol
41368-EN-121011
10. Place probably existing indicating and adjustment module back
on
11. Screw the housing cover back on
The electrical connection is hence finished.
5.3 Wiring plan, double chamber housing
2
1
Fig. 18: Position of connection compartment (Modbus electronics) and electron-
ics compartment (sensor electronics)
1 Connection compartment
2 Electronics compartment
5 6 7 8
4...20mA
2
1 2 +
( ) (-)
1 1
Fig. 19: Electronics compartment, double chamber housing
1 Internal connection to the connection compartment
2 For indicating and adjustment module or interface adapter
Information:
The connection of an external indicating and adjustment unit is not
possible with this double chamber housing.
Overview
Electronics compartment