Yamaha DVD-S2500 - Manual (Page 19)

15
Eng
lish
On-screen menu
Slide Show
Use this feature for JPEG slide show playback.
Picture time
Sets the duration for each image.
Choices: Slow, Medium, Fast
Initial setting: Medium
Access
Disc lock
This function enables you to restrict others from
accessing certain discs.
If this setting is on, you need to enter the four-digit PIN
to modify the [Access] menu settings before you can
play the disc.
Choices: On, Off
Initial setting: Off
Change PIN
Enables you to change the four-digit PIN.
To change the four-digit PIN, enter the current PIN first,
then enter the new four-digit PIN.
Enter PIN
Enter the four-digit PIN to unlock the disc or to display
the [Access] menu.
Parental level
DVD movies may contain scenes that are unsuitable for
children. Therefore, some discs contain parental control
information that may apply to the entire disc or to
certain scenes. Ratings are country-specific. You can
specify a country code in the On-screen menu (Setup ➔
Language ➔ Country). See “Country” on page 29.
Choices: 0 to 8
Initial setting: 0
Country
Selects a country to apply its rating system to Parental
Level control.
Features
PBC
A VCD menu screen is displayed when this setting is on.
Choices: On, Off
Initial setting: On
Sleeptimer
Places this unit in standby mode when playback is
stopped and this unit is not operate for 20 minutes.
Choices: On, Off
Initial setting: Off
TV
TV shape
If you connect to a conventional 4:3 aspect TV, select
[4:3 panscan] (the left and right sides are trimmed when
you play 16:9 video) or [4:3 letterbox] (black areas
appear at the top and bottom when you play 16:9 video).
Select [Widescreen] if you connect to a Wide-Screen
TV.
Choices: 4:3 panscan, 4:3 letterbox, Widescreen
Initial setting: 4:3 panscan
TV System (NTSC/PAL conversion)
Allows you to select [PAL], [NTSC] or [Auto] mode to
match your TV system. You can play PAL discs on
NTSC monitor, and NTSC discs on PAL monitor. The
initial setting is [NTSC].
Choices: PAL, NTSC, Auto
The following conversions are supported.
Notes:
– In progressive scan mode, the output signals from the
VIDEO and S VIDEO jacks are same as the format of
the disc you play.
– Some image distortion occurs when switching the
NTSC and PAL mode.
– If your TV does not accept the selected mode while
you change the [TV System] setting, the screen will
be distorted so that you cannot recognize the On-
screen menu. When it occurs, you can change the
[TV System] settings by the remote control
operations. Follow the procedures below.
• Choosing [PAL]:
Press “PLAY” ➔ “2” ➔ “5” ➔ “6” ➔ “PLAY”
on the remote control.
• Choosing [NTSC]:
Press “PLAY” ➔ “2” ➔ “5” ➔ “7” ➔ “PLAY”
on the remote control.
Do not perform this operation while playing back a
disc on this unit.
Setup
Disc
Format
Output format
Selected mode
NTSC PAL AUTO
NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
Widescreen
4:3 letterbox
4:3 panscan