Yamaha DVD-S2500 - Manual (Page 32)

28
Operation
FTS video/audio program
• The FTS (Favorite Track Selection) function enables
you to store your favorite tracks, etc.
• The FTS list can contain up to 20 items.
• The most recent program list is placed on the top of the
existing list.
1 Press ON SCREEN on the remote control.
➜ The On-screen menu appears.
2 Go to [Tracks] (Toolbar ➔ Program ➔ Tracks) by using
the k n l h buttons, then press the h button.
3 Press the k n button to select the item to store in your
FTS list, then press the ENTER/OK.
➜ The selected item flashes momentarily when it is
stored in the FTS list.
4 Repeat the above procedure to set the FTS list.
5 Press the l button, then press ON SCREEN to exit
from the On-screen menu.
➜ This unit starts playing the FTS list automatically.
Notes:
– You can check your FTS list in the On-screen menu
(Toolbar ➔ Program ➔ Playlist). Press the k n
buttons to navigate the playlist menu.
– For SA-CD, you can program FTS list in the
currently selected area only.
– For DVD-Audio, the password must have been
entered in order to play bonus tracks.
Activating/deactivating the FTS
program
You need to select [On] in the [Program] menu to
activate the FTS function.
1 Press ON SCREEN on the remote control.
➜ The On-screen menu appears.
2 Go to [Program] (Toolbar ➔ Program ➔ Program) by
using the k n l h buttons, then press the h button.
3 Press the k n to select [On] or [Off].
4 Press the l button, then press ON SCREEN to exit
from the On-screen menu.
Erasing a track/chapter/index from
the FTS list
You can erase the items that you programmed in the
FTS list.
1 Press ON SCREEN on the remote control
➜ The On-screen menu appears.
2 Go to [Playlist] (Toolbar ➔ Program ➔ Playlist) by
using the k n l h buttons, then press the h button.
3 Press the k n button to select the item you want to erase,
then press ENTER/OK.
➜ The selected item disappears from the list.
4 Press the l button, then press ON SCREEN to exit
from the On-screen menu.
Erasing all tracks/chapters/indexes
from the FTS list
You can erase everything at once in the FTS list.
1 Press ON SCREEN on the remote control.
➜ The On-screen menu appears.
2 Go to [Clear all] (Toolbar ➔ Program ➔ Clear all) by
using the k n l h buttons, then press the h button.
➜ “Cleared” appears momentarily, then all items in the
list are erased.
3 Press the l button, then press ON SCREEN to exit
from the On-screen menu.
Activating/deactivating Disc lock
Using this function you can prohibit the access of others
to certain discs.
1 Press ON SCREEN on the remote control.
The On-screen menu appears.
2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) using
the k n l h buttons, then press the h button.
3 Enter the four-digit PIN of your own choosing.
4 Move to [Disc lock] menu using the k n buttons.
5 Select [On] or [Off] using the k n buttons.
6 Press the l button, then press ON SCREEN to exit the
On-screen menu.
➜ If you select [On] in the [Disc lock] menu,
unauthorized discs will not be played unless the four-
digit PIN is entered.
Notes:
– Confirmation of the four-digit PIN is necessary
when:
• The PIN is entered for the very first time (see
above).
• The PIN is changed or cancelled (see “Changing
the four-digit PIN” on page 29).
– If you select [Off] in the [Disc lock] menu, the FTS
function will not be performed.
Authorizing discs
When [Disc lock] is [ON], you must authorize discs
before you can play them.
1 Insert the disc.
The Disc lock dialog will appear.
2 Enter your four digit PIN for [Play once] or
[Play always].
• If you enter the four-digit PIN for [Play Once], the disc
can be played one time only. You must re-enter the code
if disc is ejected or the power is turned off.
• If you enter the four-digit PIN for [Play always], the disc
can be played anytime, even when [Disc lock] is [ON].
DVD-A DVD-V VCD CD SA-CD MP3
Disc lock DVD-A DVD-V VCD