RoverComputers RoverPC P7 PDA - Manual (Page 102)

92
Creating a Bond
1. Make sure that the two devices are within 10 meters (30 feet) of one another
and that Bluetooth is in discoverable mode on both devices. (See “Selecting
a Bluetooth Mode” earlier.)
2. Tap Settings Connections tab Bluetooth Bonded Devices tab
New.
3. Your Pocket PC searches for other Bluetooth devices and displays them in the list.
4. Tap the name of the other device and then Next.
5. In PIN , enter a PIN of between 1 and 16 characters and tap Next .
6. Enter the same PIN on the other device.
7. If you want, in Name , edit the name of the other device. You may use any
name.
8. Tap Finish .
Accepting a Bond
1. Make sure that the two devices are within 10 meters (30 feet) of one another
and that Bluetooth is in discoverable mode on both devices. (See “Selecting
a Bluetooth Mode” earlier.)
2. When prompted to bond with the other device, tap Yes .
3. In PIN , enter a PIN of between 1 and 16 characters and tap Next . You must
enter the same PIN that was entered on the device requested the bond.
4. If you want, in Name , edit the name of the other device. You may use any
name.
5. Tap Finish . The bond is created. You can now exchange information with
the other device.
NOTE: To delete a bond, tap Settings Connections tab Bluetooth
Bonded Devices tab. Tap and hold the bond to delete. Tap Delete.