RoverComputers RoverPC P7 PDA - Manual (Page 103)

93
Using a Bluetooth Phone as a Modem
NOTE: Make sure that the GPRS of the Bluetooth phone has been correctly configured
and is operating.
You can use a phone that has Bluetooth capabilities as a modem for your Pocket
PC. To do this, you create a Bluetooth modem connection on your Pocket PC
and then send information to the phone by using Bluetooth.
Creating a Bluetooth Modem Connection
1. Make sure that the Bluetooth phone is turned on, that your Pocket PC’s and
the phone’s Bluetooth radios are turned on, and that your Pocket PC and the
phone are within 10 meters (30 feet) of one another.
2. Tap Settings Connections tab Connections Add a new modem
connection.
3. Enter a name for the connection.
4. In the Select a modem list, tap Bluetooth Next .
5. Make sure that the phone is discoverable. Some phones may also need to be
pairable in order to accept a bonding request. For more information, see
your phone documentation.
6. If the phone appears in the My Connections list, skip to step 13. If not, tap New
and follow the remaining steps.
7. In the list, tap the phone and then Next .
8. In PIN , enter a PIN of between 1 and 16 characters and tap Next .
9. Enter the same PIN on the phone.
10. If you want, in Name , edit the name of the phone.
11. Tap Finish .
12. In the My Connections list, tap the phone and then Next .
13. Enter the phone number to dial for this connection and tap Next .
14. In User name , Password and Domain , enter the logon information for this
connection and tap Finish .