RoverComputers RoverPC P7 PDA - Manual (Page 17)

7
1.2 Setting Up Your Pocket PC for Use
Performing Initial Startup
Initial startup includes setting the backup battery switch, installing the battery,
and completing the Welcome Wizard.
1. The backup battery switch should be set to the ON position for normal
operation. Pull out the stylus and use it to slide the battery switch in the
battery compartment to the ON (right) position.
CAUTION: Always leave the backup battery switch in the ON position for normal
operation. Changing the switch will cause your data to be lost.
2. Fit the battery into the compartment. The battery lock should click into
place.
3. Your Pocket PC will automatically turn on and display the “Welcome”
screen.
NOTE: In case your Pocket PC didn’t automatically turn on, use the stylus to firmly press
the RESET button at the back of your Pocket PC to turn it on.