Velleman VRC801D2 - Manual

VRC801D2 VELLEMAN
- 1 -
VRC801D2 – UNIVERSAL 8-IN-1 REMOTE CONTROL WITH LEARNING FUNCTION
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for
recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VRC801D2! Please read the manual thoroughly before bringing this device into service. If the device was
damaged in transit, don't install or use it and contact your dealer.
This universal remote control replaces the remote for most brands of television sets, video recorders, DVD and CD players,
radios, satellite cable TV, audio amplifiers, and other devices.
The VRC801D2 features a quick, automatic or manual code search function. In case the code has not been found, the remote
control can learn the new code. VOLUME and DEVICE can be locked to avoid unwanted modifications.
The large blue backlit LCD shows you the actual operation status. A lo-bat icon warns you when the batteries are low.
Once set up, all data (except time) will be stored in the back-up memory to avoid data loss when changing the batteries.
2. Description (fig. 1)
Key Function
SET
Set up remote control
TV VCR DVB DVD
TUNER TAPE CD
AUX Select the device you want to control
Turn the device ON or OFF
AV Works like the TV/VIDEO key on your original TV
remote control and TV/SAT key on your original
satellite remote control
MENU Works like the MENU, OSD or MEMORY key on
your original remote control
CH Channel UP and DOWN
VOL Volume UP and DOWN
0 ~9 The numeral keys operate in the same way as
those on your original remote control. They can also
be used to enter the device codes during setup
OK EXIT Keys work like the LEFT, RIGHT, UP, DOWN, OK
and EXIT keys on your original remote control.
During the setup, they will be used to select, to
confirm and to exit when programming your remote
control
Works like the ENTER key on your original remote
control
Fast rewind / fast forward
PLAY Play your CD, DVD etc.
REC Record
STOP Stop
PAUSE Pause
MUTE Instant sound muting
Television video
TV and text mixed
Teletext mode
Page hold
RED, GREEN,
YELLOW and BLUE Fastext
ALL OFF Turn all devices on or off
LEARN Set the learning function
SHOW VIEW Scan all channels for your quick view
MACRO Carry out several functions with just one press