Velleman VDPL3610MHZ - Manual (Page 10)

VDPL3610MHZ
V. 01 – 07/06/2013 10 ©Velleman nv
Resetting to Factory Defaults
To reset the device to its factory defaults, proceed as follows:
1. In the main menu, press [Setup].
2. Select [Factory Set] and press [Enter]. [YES] appears on the display.
o Press [Enter] to reset the device to the factory settings.
o Press [Return] to quit without resetting.
Caution: When you reset the device to the factory defaults, the display language may switch to Chinese. To set
the language back to English, press the icon in the lower left corner of the display (the one that looks like a
globe) and select [English] in the menu that appears. If the display does not show the main menu with the
icons, press the upper right button to return to the main menu.
9. Cleaning and Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the casing and the external optics with normal glass cleaner and a soft cloth every 20 days. Dry
carefully after cleaning. Note: Cleaning frequency depends on the environment in which the device
operates (smoke, fog…).
Do not immerse the device in any liquid.
There are no user-serviceable parts, apart from the fuse.
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, unplug the mains lead.
2. Unscrew the fuse holder on the rear panel of the base with an appropriate screwdriver.
3. Remove the old fuse and install the new fuse in the fuse holder.
4. Replace the fuse holder in the housing and tighten it.
10. Technical Specifications
power supply 230 VAC / 50 Hz
LED 36 x 10 W RGBW high-power quad LED
power consumption 360 W
zoom 15-45° linear zoom
dimensions 480 x 350 x 400 mm
weight 9 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.