Velleman LX101 - Manual (Page 8)

LX101
V. 01 – 06/06/2012 8 ©Velleman nv
channel function from to description
white
201 205 3200K
206 210 3400K
211 215 4200K
216 220 4900K
221 225 5600K
226 230 5900K
231 235 6500K
236 240 7200K
241 245 8000K
246 250 8500K
251 255 10 000K
6 strobe
000 009 strobe off
010 255 strobe 0 ~ 20Hz (slow ~ fast)
7 auto programs
000 051 no function
052 101 auto program 1
102 152 auto program 2
153 203 auto program 3
204 254 auto program 4
255 - auto program 5
8 speed 000 255 speed of auto programs (slow ~ fast)
9 dimmer
000 051 default dimmer speed
052 101 linear dimmer
102 152 non-linear dimmer 1
153 203 non-linear dimmer 2
204 255 non-linear dimmer 3
4-Channel Mode
channel function from to description
1 master dimmer 000 255 0 ~ 100%
2 red 000 255 0 ~ 100%
3 green 000 255 0 ~ 100%
4 blue 000 255 0 ~ 100%
3-Channel Mode
channel function from to description
1 red 000 255 0 ~ 100%
2 green 000 255 0 ~ 100%
3 blue 000 255 0 ~ 100%
7.5 Master/Slave Mode
This mode allows control several units simultaneously.
1. Use standard DMX cables to daisy-chain your units together via the DMX connector on the rear of
each fixture. For longer cable runs we suggest using a terminator on the last fixture.
2. Choose the first unit in the chain to function as the master fixture. Press <MENU> and choose a
mode ( , or ).
3. On each of the connected slave units, set the same channel mode as the master (via ).
4. Set the DMX address of all slave units to 1 ( ).