Velleman LX101 - Manual (Page 9)

LX101
V. 01 – 06/06/2012 9 ©Velleman nv
8. Cleaning and maintenance
• All screws should be tight and free of corrosion.
• The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections…
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
• Regularly remove dust from the housing and the air vents using a slightly damp cloth.
• There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.
Fuse Replacement
1. Wedge the fuse holder [6] out of its housing with a flat-head screwdriver.
2. Remove the damaged fuse from its holder and replace with exact same type of fuse.
3. Insert the fuse holder back in its place and reconnect power.
9. Technical Specifications
power supply 240VAC ~ 50Hz
power consumption 45W
light source 18x high-power 3W tri-colour LEDs
beam angle 20°
luminous flux 9600 lm @ 1 m
dimensions 255 x 255 x 80mm
weight 3.5kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.luxibel.com.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.