Velleman LPTDX1220 User Manual
Page 13
LPTDX1220 GB
13
Setting 7 : Setting the Maximum Output Power Limit
This is the max. output power control (from 50% --- FF% (100%)
= all channels
1 = 1
st
channel
2 = 2
nd
channel
3 = 3
rd
channel
4 = 4
th
channel
5 = 5
th
channel
6 = 6
th
channel
7 = 7
th
channel
8 = 8
th
channel
9 = 9
th
channel
A = 10
th
channel
B = 11
th
channel
C = 12
th
channel
Press ► to increase channels
Press ◄ to decrease channels
Press ▲ to increase the max. output power
Press ▼ to diminish the max. output power
Press SEL to confirm
When a channel is set as a non-dimming channel, it doesn’t have a preheat function and a you
cannot install a max. output power output wattage limit setting function.
The factory setting is FF for all channels, which means “100% output”.
7. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, mounting supports and connections should not be modified or tampered with
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections, …
3. The electric power supply cables should be undamaged. Have this device installed by a
qualified technician.
8. Caution
• Disconnect the device from the mains prior to maintenance.
• Use a moist cloth to clean the device and avoid the use of alcohol or solvents for cleaning
purposes.
• Spare parts should be ordered with your local dealer.