Velleman Central Management System - Manual (Page 39)

36
Function Description
Image Size / Quality Choose the image size and quality.
Manual Record / Event Record /
Timer Record Select the record type that the DVR will take recording (Yes / No), and select the
IPS setting for the selected record type.
Pre-Alarm Record Check this option if you want to enable the pre-alarm recording function.
When any alarm is triggered, the DVR will record 8MB video data before the
alarm event actually happened.
Overwrite Select “Yes” to enable the HDD overwrite function when the HDD is full, or “No” to
disable this function.
When this function is on, and the recording and the pre-alarm function are
activated, the DVR will overwrite 8GB data from the oldest for continuous
recording without notice.
9.4.5 Record Timer
You can set the record schedule for normal recording or motion recording.
Function Description
Permit Select this checkbox to allow the record timer setting to be applied to the connected DVR. If
this checkbox is deselected, the setting will not be applied to the connected DVR even when
you click “Apply” and “OK”.
Routine / Motion Click “Routine” tab to select the time range for continuous recording, or “Motion” tab to select
the time range within which the recording will be on when any movement is detected.
Time Table Find the day and time you want to enable the recording. Then, click to select the time
interval(s). Each interval represents 30 minutes.
To enable the recording all the time, click “＋”; to clear the record timer setting, click “－”.
9.4.6 Alert
You can set the DVR to beep to notify of an event. Check the buzzer option you want,
and set how long the beep sound will be lasted.