Banks Power 2001-2004 (LB7) Chevy_GMC 6.6L Duramax Turbo-Diesel Pickups User Manual
Page 10
43.
From the engine compartment,
locate the rubber grommet high on
driver side of the vehicle firewall. The
grommet is about 3” in diameter.
Make a 1” x 1” cross-shaped incision
in the grommet (see Figure 7).
44.
From the engine compartment,
feed the two white 8-pin and the
white10-pin connectors through the
grommet into the cab. From inside
the cab, remove the lower dash
panel under steering column to allow
access to the wire harness.
45.
Locate the two BLAcK wire
harness connectors between the
brake fluid reservoir and the air
conditioning compressor. Lift the
grey connector lock and disconnect
the 38-pin connector pair and the
24-pin connector pair (see Figure 8).
46.
Insert the male 38-pin connector
on the OttoMind harness into the
female 38-pin connector on the
factory harness. Insert the female
38-pin connector on the OttoMind
Section 4
oTToMIND INSTALLATIoN
Figure 8
Figure 7
10
96773 v.7.0